This section will assist you with the installation of the I-Speed Web Accelerator.
Detailed Installation Instructions
The minimum system requirements are a Pentium 200MHz with 64MB RAM, and
at least 5MB of hard-drive space. I-Speed Accelerator is supported on
the following Windows Operating Systems: Windows 95b with Winsock 2,
Windows 98, Windows 98SE, Windows Millennium Edition (Windows ME), Windows
NT 4.0 Service Pack 6, Windows 2000 and Windows XP. It works with Internet
Explorer 5.0 as well as Netscape 6.0 or any later releases of both
CVC Internet will provide you with a location to download the I-Speed Web Accelerator installer.
Download the installer to your desktop.
Once the download has completed, proceed to Step 2.
After downloading the I-Speed Web Accelerator installer onto your
Desktop, an icon as shown below will be on your Desktop. Double-clicking
on the icon will launch the installer.
The installer will guide you through the complete setup process.
As this is your first time launching the product, you will be
prompted for a username and password. Enter the username and password
provided to you by your ISP in the fields provided.
Click OK. I-Speed Web Accelerator will connect to your ISP.
After installing I-Speed Web Accelerator, an icon as shown below
is placed in your system tray. Acceleration will take place immediately
after any web browser launches.
4. Browse the Web.
Browse the web as you normally would.
When finished, simply close your web browser, as you normally would,
and I-Speed Web Accelerator will remain idle in your system tray.
If you want to stop the application after browsing, select Stop I-Speed
from the pop-up menu. If you desire to exit the
application completely, click Exit from the pop-up menu. The
pop-up menu can be accessed by clicking on the icon located in the
5. Further Assistance.
To get the most out of your new software, please visit the "Using I-Speed Web
If you experience technical problems downloading, installing or
running I-Speed Web Accelerator, consult the Troubleshooting
section for further assistance.
Still having trouble? Feel free to contact us for product
setup or feedback.