1. Using I-Speed Web Accelerator.

2. Advanced Options.

3. Uninstalling.

Need further assistance? Feel free to contact us for product information or feedback.

 

Launching I-Speed Web Accelerator

I-Speed Web Accelerator launches automatically each time you start Windows. It operates in the background to accelerate your Internet connection. No user intervention is required.

If I-Speed Web Accelerator is not running and you need to launch it manually, an icon titled "I-Speed Web Accelerator" is located in the Windows Start Menu under the I-Speed folder (as shown below).

If I-Speed Web Accelerator is running, the I-Speed taskbar icon will appear in the Windows system tray


top

 

Accessing the User Interface

Once launched, I-Speed Web Accelerator icon will remain in the system tray (as shown below).

In general, there will be no need to change settings during web browsing. You can use the user interface to change settings, view connection status or acceleration statistics. To access the user interface features, click on the I-Speed Web Accelerator icon in the system tray (shown above). A pop-up menu will appear (shown below), providing access to all the features of the product. Selecting and single-clicking any of the menu items will access that particular feature.

top

 

Setting Username and Password Information

Your username and password information is located in the Connection Status dialog. To set your username and password:

  1. Right-click on the I-Speed Web Accelerator taskbar icon and select "Settings..." from the menu.

  2. Click on the "Connection" tab.

  3. Enter your username and password in the fields provided. To avoid having to do this each time you connect, ensure that the "Save password" box is checked.

  4. To save your settings, press OK.



top

 

Changing the Image Quality Setting

The image quality setting changes the quality of images that appear in your I-Speed Web Accelerator. The higher the quality you select, the longer it will take the image to load. For slower Internet connections, it is recommended that you lower your image quality. This slider can be adjusted anytime while browsing.

You can easily obtain full image quality for a particular image (described below), so don't be overly conservative about lowering your image quality setting.

  1. Right-click on the I-Speed Web Accelerator system tray icon. See the user interface section of the product guide for detailed instructions.

  2. Select "Settings...".

  3. Select the "Image Quality" tab.

  4. Use the slider bar to adjust the image quality setting.

  5. Press OK to save the settings.


Getting Full Image Quality

Note: The following information applies only when browsing with Internet Explorer.

While browsing, if you would like to request the full quality image, simply right-click on the desired image from within Internet Explorer and select "Show Original Image" from the menu (shown below).

The full quality image will appear in place of the lower quality image (shown below).

 

If you want to see the full quality version of all images on the current page, simply right-click on any image from within Internet Explorer and select "Show All Original Images" from the menu (shown below).



top

 

Changing the Pop-Up Blocker Settings

I-Speed Web Accelerator can prevent pop-up windows and floating flash advertisements from appearing while you browse the Internet. This behavior is enabled by default, and no user-intervention is required. However, you can disable these features at any time.

A limited number of web sites require pop-ups to function correctly. I-Speed Web Accelerator allows you to specify a "White List" of sites where pop-ups will not be blocked.

You can also see a list of all pop-ups that were blocked. This information is useful if you suspect a web site is not functioning properly because pop-ups are being blocked.

To enable or disable the Pop-Up Blocker

  1. Right-click on the I-Speed Web Accelerator system tray icon and select "Pop-Up Blocker...". Please refer to the user interface section of the product guide for detailed instructions.

  2. Select the "Options" tab.

  3. If you would like to be notified any pop-up being blocked, check "Notify blocked pop-up by PC speaker beep".

  4. To enable the blocking of floating Flash advertisements, check "Block Floating Flash-Ads".

  5. To disable all pop-up blocking for all sites, uncheck "Enable PopUp Blocker".

  6. Press OK to save the settings.

To Disable the Pop-Up Blocker for Specific Sites

  1. Right-click on the I-Speed Web Accelerator system tray icon and select "Pop-Up Blocker...". Please refer to the user interface section of the product guide for detailed instructions.

  2. Select the "White List" tab.

  3. Use the "Add", "Remove" and "Remove All" buttons to manipulate the White List.

  4. Press OK to save the settings.

To View the Pop-Up Blocker Log

  1. Right-click on the I-Speed Web Accelerator system tray icon and select "Pop-Up Blocker...". Please refer to the user interface section of the product guide for detailed instructions.

  2. Select the "Logging" tab.

  3. To add a web site to the "White List" so that pop-ups are no longer blocked from that site, right-click on the site and click "Add to Whitelist".

To Add Sites to the White List

You can add sites to the White List within the Pop-Up Blocker dialogs (which is shown above) or from within Internet Explorer.

  1. Right-click on any text while browsing within Internet Explorer.

  2. Select "Add to Whitelist" from the menu to add the current site to the White List.



top

 

Blocking In-Page Advertisements

I-Speed Web Accelerator can block many graphical advertisements that appear on various web pages (i.e. ad banners). Enabling this feature will prevent these ads from being downloaded and displayed in your browser. The Block In-Page Advertisements feature will thus reduce download time.

To Enable or Disable the Ad Blocker

  1. Right-click on the I-Speed Web Accelerator system tray icon and select "Settings...". Please refer to the user interface section of the product guide for detailed instructions.

  2. Select the "Features" tab.

  3. To enable ad blocking, check the "Block in-page advertisements" box. To disable ad blocking, uncheck it.

  4. Press OK to save the settings.



top

 

Starting and Stopping I-Speed Web Accelerator

When I-Speed Web Accelerator is launched it automatically connects. Occasionally, you may need to stop or start manually.

Stopping I-Speed:

If you want to manually disconnect, right-click on the I-Speed Web Accelerator system tray icon to access the pop-up menu. Select the menu item "Stop I-Speed".

The icon used when I-Speed Web Accelerator is disabled will appear on the system tray.

Starting I-Speed:

If I-Speed is stopped and you want to manually start, right-click on the I-Speed Web Accelerator system tray icon to access the pop-up menu. Select the menu item "Start I-Speed".

The icon used when I-Speed Web Accelerator is disabled will now be replaced with the enabled icon.



top

 

Closing I-Speed Web Accelerator

To close I-Speed Web Accelerator:

  1. Right-click on the I-Speed Web Accelerator system tray icon and select "Exit" from the pop-up menu (see below). I-Speed Web Accelerator will disconnect and close. Doing this will not close any open browser windows.

    Note: I-Speed Web Accelerator will automatically launch again the next time you reboot your computer.



top

 

Changing Your Connection Settings

Normally, the connection settings that are set during installation do not need to be changed. If, however, your ISP provides new connection settings, you may change the preset ones using the "Settings..." dialog.

  1. Click on the I-Speed Web Accelerator system tray icon to access the pop-up menu.

  2. Select "Settings...".

  3. Click on the "Connection" tab.

  4. Click on "Advanced...".

  5. Change the "Remote Server Hostname" and "Server Port" to the ones your ISP provided you. In most cases, it is unnecessary to change the "Local Listening Port".

  6. Press "OK" to close the "Connection" dialog box.

  7. Press "OK" to save your new connection settings. These settings will be used next time you connect with I-Speed Web Accelerator.



top

 

Bypassing I-Speed Web Accelerator for Selected Sites

If you wish to bypass I-Speed Web Accelerator for certain web sites (web sites on your local corporate intranet, for instance), then simply select the "Features" tab on the "Settings..." dialog and click on "Proxy Exclusion" (see below). You have two options for bypassing sites:

  1. If you have already defined a proxy exclusion list in your web brower, select "Use browser's proxy exclusion settings" to configure I-Speed Web Accelerator to exclude these sites as well.

  2. You may also "Specify a proxy exclusion list" by selecting this option. In the given text field, list all the web sites, separated by semicolons, that you wish to bypass I-Speed Web Acceleration.

  3. Stop and then start I-Speed Web Accelerator.

Note:  Some versions of Netscape do not support the wildcard (*) operator.



top

 

Accelerating Email

I-Speed Web Accelerator can reduce the amount of time it takes to send and receive email. I-Speed Web Accelerator accelerates email transparently without any user intervention, so you can use your mail program exactly as you normally would. It is compatible with any POP3/SMTP client, including Outlook Express, Eudora and Netscape Mail. Email acceleration is disabled by default.

To enable email acceleration:

  1. Right-click on the I-Speed Web Accelerator system tray icon. See the user interface section of the product guide for detailed instructions.

  2. Select "Settings...".

  3. Select the "Features" tab.

  4. Check "Enable I-Speed Email".

  5. Press OK to save the settings. The changes will take effect the next time I-Speed Web Accelerator and your mail client are restarted.



top

 

Viewing Your Acceleration Statistics

You can view the acceleration statistics and how they change dynamically using the Statistics dialog.

  1. Click on the I-Speed Web Accelerator taskbar icon to access the pop-up menu.

  2. Select "Statistics...", to display the Statistics summary dialog.

  3. Click "Reset" to reset the statistics. You may do so at anytime while browsing without affecting I-Speed Web Accelerator's performance or operation.

  4. Click the "Details" button to view more detailed statistics information (see below).

    Consult the following table for a description of the values.

    Original Data

    Size of the original (uncompressed) data.

    Actual Data

    Amount of data sent by I-Speed Web Accelerator.

    Savings Ratio

    Factor of reduction in data. E.g. A savings ratio of 4.00 means that the actual data being sent has been compressed to 1/4 the size of the original data.

    Text-based

    This row contains compression information regarding text-based content.

    Graphics

    Contains compression information regarding graphical content.

    Others

    Contains information regarding content that is neither text nor graphical.

    Upstream

    Lists the total original and compressed amounts of data uploaded.



top

 

Viewing I-Speed Web Accelerator's Performance

You can view the accelerator's overall performance using the Performance dialog.

  1. Click on the I-Speed Web Accelerator taskbar icon to access the pop-up menu.

  2. Select "Performance...", to display the Performance dialog.

  3. Click "Reset" to reset the statistics. You may do so at anytime while browsing without affecting I-Speed Web Accelerator's performance or operation.

From this screen you can view the size of the original (uncompressed) data transferred through I-Speed, the actual (compressed) size of the data, and your savings ratio. For example, a savings ratio of 4.00 means that the actual data being sent has been compressed to 1/4 the size of the original data.

Also this screen displays the speed of your connection and the estimated amount of downloading/uploading time saved by using the accelerator. Note that these two features are only available when using a dial-up connection.



top


Accessing Product Version Information

To view the product version information.

  1. Right-click on the I-Speed Web Accelerator taskbar icon to access the pop-up menu.

  2. Select "Help" > "About" to display the About dialog (see below).



top

 

Updating Your Software

AutoUpdate will inform you of any major or minor software upgrades to the I-Speed Service. By default, you will be notified of all software upgrades.

To manually update I-Speed Web Accelerator:

  1. Open the "Settings..." dialog.

  2. Click on the "Update" tab.

  3. Select "Update Now" to upgrade to the latest version.



top

 

Uninstalling I-Speed Web Accelerator

  1. Under the Windows Control Panel, select "Add or Remove Programs".

  2. Select I-Speed Web Accelerator and click Remove.

  3. The uninstaller will launch and guide you through the uninstallation procedure.



top

 

 

Copyright 1996-2009, CVC Internet, LLC.  All rights reserved. 
Certain names, logos, designs, titles, words or phrases on this site may
constitute trademarks, service marks or trade names of CVC Internet, LLC.,
or other entities which may be registered in certain jurisdictions.


This web site contains links to other Internet sites, and such links are not
endorsements of any products or services of such sites, and no information

in such Internet sites has been endorsed or approved by CVC Internet, LLC.

CVC Internet, LLC disclaims any responsibility, if some web site you link
to has material on it that offends you in any way.  If problems or
questions arise with the use of any of the linked web sites, please
contact the company that owns or operates the Internet site.