If you are having
difficulties with your hardware or software programs,
please contact a computer repair shop or the manufacturer.
| Error # | ERROR MESSAGE | Additional Information |
| 600 | An operation is pending. | |
| 601 | The port handle is invalid. | Wrong information. |
| 602 | The port is already open. | You are already connected. |
| 603 | Caller's buffer is too small. | |
| 604 | Wrong information specified. | Put in the correct information. |
| 605 | Cannot set port information. | |
| 606 | The port is not connected. | |
| 607 | The event is invalid. | |
| 608 | The device does not exist. | You are trying to use something that is not there. |
| 609 | The device type does not exist. | You are trying to use something that is not there, that the computer has no idea what type of thing it is. |
| 610 | The buffer is invalid. | |
| 611 | The route is not available. | |
| 612 | The route is not allocated. | |
| 613 | Invalid compression specified. | |
| 614 | Out of buffers. | |
| 615 | The port was not found. | |
| 616 | An asynchronous request is pending. | |
| 617 | The port or device is already disconnecting. | Your computer is already disconnecting, let it finish. |
| 618 | The port is not open. | You are not connected. |
| 619 | The port is disconnected. | You just disconnected. |
| 620 | There are no endpoints. | |
| 621 | Cannot open the phone book file. | |
| 622 | Cannot load the phone book file. | |
| 623 | Cannot find the phone book entry. | DUN is missing data. |
| 624 | Cannot write the phone book file. | |
| 625 | Invalid information found in the phone book. | |
| 626 | Cannot load a string. | |
| 627 | Cannot find key. | Windows is missing data in the registry. |
| 628 | The port was disconnected. | You have been disconnected. |
| 629 | The port was disconnected by the remote machine. | You have been disconnected by the other computer. |
| 630 | The port was disconnected due to hardware failure. | You have been disconnected because something stopped working. |
| 631 | The port was disconnected by the user. | You disconnected yourself. |
| 632 | The structure size is incorrect. | |
| 633 | The port is already in use or is not configured for Remote Access dial out. | Windows does not notice that you are not connected. |
| 634 | Cannot register your computer on the remote network. | |
| 635 | Unknown error. | Windows has no idea what went wrong. |
| 636 | The wrong device is attached to the port. | You have stuff plugged into the wrong place. |
| 637 | The string could not be converted. | |
| 638 | The request has timed out. | The other computer is taking to long to respond. |
| 639 | No asynchronous net available. | |
| 640 | A Net BIOS error has occurred. | |
| 641 | The server cannot allocate Net BIOS resources needed to support the client. | Your computer is doing too much to also connect. |
| 642 | One of your Net BIOS names is already registered on the remote network. | Some one else is using your name. |
| 643 | A network adapter at the server failed. | The big computer is having hardware problems. |
| 644 | You will not receive network message pop ups. | |
| 645 | Internal authentication error. | The other computer goofed up when checking to make sure that you are who you say you are. |
| 646 | The account is not permitted to log on at this time of day. | Make sure you are dialing the right phone #, if so try again later. |
| 647 | The account is disabled. | Talk to your system administrator. |
| 648 | The password has expired. | You are using an old password. |
| 649 | The account does not have Remote Access permission. | |
| 650 | The Remote Access server is not responding. | |
| 651 | Your modem (or other connecting device) has reported an error. | Your computer is having hardware problems. |
| 652 | Unrecognized response from the device. | |
| 653 | A macro required by the device was not found in the device .INF file section. | |
| 654 | A command or response in the device .INF file section refers to an undefined macro. | |
| 655 | The <message> macro was not found in the device .INF file section. | |
| 656 | The <default off> macro in the device .INF file section contains an undefined macro. | |
| 657 | The device .INF file could not be opened. | Windows is having problems reading the information needed to do what you want it to. |
| 658 | The device name in the device .INF or media .INI file is too long. | |
| 659 | The media .INI file refers to an unknown device name. | |
| 660 | The device .INF file contains no responses for the command. | |
| 661 | The device .INF file is missing a command. | |
| 662 | Attempted to set a macro not listed in device .INF file section. | |
| 663 | The media .INI file refers to an unknown device type. | |
| 664 | Cannot allocate memory. | |
| 665 | The port is not configured for Remote Access. | |
| 666 | Your modem (or other connecting device) is not functioning. | |
| 667 | Cannot read the media .INI file. | |
| 668 | The connection dropped. | Fumble, due to computer system or phone line. |
| 669 | The usage parameter in the media .INI file is invalid. | |
| 670 | Cannot read the section name from the media .INI file. | |
| 671 | Cannot read the device type from the media .INI file. | |
| 672 | Cannot read the device name from the media .INI file. | |
| 673 | Cannot read the usage from the media .INI file. | |
| 674 | Cannot read the maximum connection BPS rate from the media .INI file. | |
| 675 | Cannot read the maximum carrier BPS rate from the media .INI file. | |
| 676 | The line is busy. | The number you are dialing is busy, check the phone number to make sure you are dialing the correct #. |
| 677 | A person answered instead of a modem. | Make sure your computer is dialing the correct number, if it is- dial it on your phone to find out what the person says. |
| 678 | There is no answer. | The computer you called did not pick up, make sure you are dialing the correct #. |
| 679 | Cannot detect carrier. | Phone line problem, contact your phone company. |
| 680 | There is no dial tone. | The computer waited to see if it was ok to dial, but could not hear the dial tone so it did not dial. |
| 681 | General error reported by device. | |
| 682 | ERROR WRITING SECTION NAME | |
| 683 | ERROR WRITING DEVICE TYPE | |
| 684 | ERROR WRITING DEVICE NAME | |
| 685 | ERROR WRITING MAX CONNECT BPS | |
| 686 | ERROR WRITING MAX CARRIER BPS | |
| 687 | ERROR WRITING USAGE | |
| 688 | ERROR WRITING DEFAULT OFF | |
| 689 | ERROR READING DEFAULT OFF | |
| 690 | ERROR EMPTY INI FILE | |
| 691 | Access denied because username and/or password is invalid on the domain. | |
| 692 | Hardware failure in port or attached device. | Your computer is having hardware problems. |
| 693 | ERROR NOT BINARY MACRO | |
| 694 | ERROR DCB NOT FOUND | |
| 695 | ERROR STATE MACHINES NOT STARTED | |
| 696 | ERROR STATE MACHINES ALREADY STARTED | |
| 697 | ERROR PARTIAL RESPONSE LOOPING | |
| 698 | A response key name in the device .INF file is not in the expected format. | |
| 699 | The device response caused buffer overflow. | |
| 700 | The expanded command in the device .INF file is too long. | |
| 701 | The device moved to a BPS rate not supported by the COM driver. | |
| 702 | Device response received when none expected. | |
| 703 | ERROR INTERACTIVE MODE | |
| 704 | ERROR BAD CALLBACK NUMBER | |
| 705 | ERROR INVALID AUTH STATE | |
| 706 | ERROR WRITING INITBPS | |
| 707 | X.25 diagnostic indication. | |
| 708 | The account has expired. | |
| 709 | Error changing password on domain. | |
| 710 | Serial overrun errors were detected while communicating with your modem. | |
| 711 | RasMan initialization failure. Check the event log. | |
| 712 | Biplex port is initializing. Wait a few seconds and redial. | |
| 713 | No active ISDN lines are available. | |
| 714 | Not enough ISDN channels are available to make the call. | |
| 715 | Too many errors occurred because of poor phone line quality. | |
| 716 | The Remote Access IP configuration is unusable. | |
| 717 | No IP addresses are available in the static pool of Remote Access IP addresses. | |
| 718 | PPP timeout. | |
| 719 | PPP terminated by remote machine. | |
| 720 | No PPP control protocols configured. | |
| 721 | Remote PPP peer is not responding. | |
| 722 | The PPP packet is invalid. | |
| 723 | The phone number, including prefix and suffix, is too long. | |
| 724 | The IPX protocol cannot dial-out on the port because the computer is an IPX router. | |
| 725 | The IPX protocol cannot dial-in on the port because the IPX router is not installed. | |
| 726 | The IPX protocol cannot be used for dial-out on more than one port at a time. | |
| 727 | Cannot access TCPCFG.DLL. | |
| 728 | Cannot find an IP adapter bound to Remote Access. | |
| 729 | SLIP cannot be used unless the IP protocol is installed. | |
| 730 | Computer registration is not complete. | |
| 731 | The protocol is not configured. | |
| 732 | The PPP negotiation is not converging. | |
| 733 | The PPP control protocol for this network protocol is not available on the server. | |
| 734 | The PPP link control protocol terminated. | |
| 735 | The requested address was rejected by the server. | |
| 736 | The remote computer terminated the control protocol. | |
| 737 | Loop back detected. | |
| 738 | The server did not assign an address. | |
| 739 | The remote server cannot use the Windows NT encrypted password. | |
| 740 | The TAPI devices configured for Remote Access failed to initialize or were not installed correctly. | |
| 741 | The local computer does not support encryption. | |
| 742 | The remote server does not support encryption. | |
| 743 | The remote server requires encryption. | |
| 744 | Cannot use the IPX net number assigned by the remote server. Check the event log. | |
| 752 | A syntax error was encountered while processing a script. |
Copyright © 1996 - 2004, CVC Internet Services. All rights
reserved.
Revised 10/00