Microsoft Outlook 2000
Configurations for CVC Internet

Please Note: These instructions are for users
who have experience setting up software programs. 

If you notice a difference in setup windows, please take the general 
information listed below and apply them in the appropriate windows.

********************************************************************

DO NOT MAKE ANY OF THESE CHANGES, 
WITHOUT YOUR WINDOWS OPERATING SYSTEM CD/DISKS

*******************************************************************

 If a Connection Wizard or a Connect To Window appear, cancel it.

2.) Click on the Tools Menu (at the top of the Outlook window), and select Accounts.

3.) In the Properties window, click on the General  tab, then complete the following:

• In the field, under the Mail Account heading, type in lowercase, no spaces: mail.cvc.net
• Under the User Information heading, in the Name field: enter your name, as you would like it to appear on your e-mail's.
• In the E-mail Address field, enter: your e-mail address (in lowercase, no spaces)
• The Organization and Reply Address fields are optional, only enter an e-mail address if it's different than the E-mail Address field. 
• Check the option Include this account in a Send and Receive All (click on the box, to place a check mark in this window).

4.) At the top of the Properties window, click on the Servers tab, then complete the following:

• Under the heading Server information, make sure the first line reads:
  My incoming mail server is a POP 3 server.
• In the Incoming mail (POP3) field, enter: mail.cvc.net (lowercase, no spaces)
• In the Outgoing mail (SMTP) field, enter: mail.cvc.net (lowercase, no spaces)
• Under the heading Incoming mail server, select the option Log on using.
• In the field of Account name: enter your CVC username (lowercase, Do Not enter @cvc.net)
• In the field of Password: enter your CVC password (lowercase)
• Select the option Remember password (click on the box, to enter a check mark).
• Make sure the option Log on using Secure Password Authentication, is Not Selected. 
• Under the heading of Outgoing mail server, make sure the option My server requires authentication, Is Selected. 

5.) At the top of the Properties window, click on the Connection tab, then complete the following:

• Under the Connection heading, select the option Connect using my phone line. 
• Under the Modem heading, Use the following Dial-Up Networking connection: select CVC Internet

6.) At the top of the Properties window, click on the Advanced tab, then complete the following:

• Under the heading Server port numbers: Outgoing mail should be set to 25 
  and Incoming mail should be set at 110.
• Make sure (both Outgoing and Incoming) This Server requires a secure connection (SSL), 
  is Not Selected.
• Server timeouts: should be at least 30 seconds long.
• Under the Delivery heading, make sure the option Leave a copy of messages on server, 
  is Not Selected. 

7.) At the bottom of the Properties window, click on the Apply button, then click OK (to save your changes and return to the Internet Accounts page).  At the bottom of the Internet Accounts window, click Close.

Your done! For information on using e-mail, refer to the Help Menu located within the software program.

Microsoft Products
 - Software Technical Information - 

FAQ’s Online Database 
 http://support.microsoft.com/directory/

Phone:
1-425-635-7222 (Windows 98/2000) 

Phone:
1-425-635-7000 (Windows 95)

Phone: 
1-425-635-7123 (Internet Explorer)

Phone:  
1-425-637-9308 (Microsoft Programs)

Copyright © 1996-2008, CVC Internet. All rights reserved.
 

 < BACK TO CVC INTERNET'S HELP GUIDE